RS232接口與單片機通訊，帶觸摸屏帶字庫，可顯示漢字和圖片，適合做智能儀表，電力設備，模擬表盤等顯示終端
//----------------------------------------------------
//STC12C2052   22.1184MHZ
//EKTC52A
//需要代碼請Mail到caoyi_027@163.com
//----------------------------------------------------
//Includes
//----------------------------------------------------
#include<reg52.h>
//----------------------------------------------------
//sbit Definitions
//----------------------------------------------------
sbit  LED=P0^0;
//----------------------------------------------------
//Glpbal CONSTANTS
//----------------------------------------------------
#define   SYSCLK      22118400                   //SYSCLK frequency in hz
#define   BAUD_RATE   115200                 //波特率
#define   uchar       unsigned char
#define   unit        unsigned int

//----------------------------------------------------
//Function PROTOTYPES
//----------------------------------------------------

Void Uart0_transmit(unsigned char i);       //聲明串口子函數
Void send_str(unsigned char*p,unsigned char s)    ; //聲明發送字符串子函數
Void delay_ms(unsigned char n);                  //聲明延時子函數
Void Sysinit(Void);                              //聲明系統初始化子函數
Void Wenbenchange1(void);                        //聲明發送文本子函數
//----------------------------------------------------
//Uart0_transmit
//----------------------------------------------------
void uart0_transmit(unsigned char i)             //想串口發送一個字節
{
              ES=0;
              TI=0
              SBUF=i;                               //發送數據到uart0
              whlie(!TI);                           //等待發送1字節數據完成
              TI=0;                                   //消除中斷標志
              ES=1；
  }
  void send_str(unsigned char *p,unsigned char s)  //向串口發送一個數據串
  {
              unsigned char m;
              for(m=0;m<s;m++)
              {
                   Uart0_transmit(*p)；
                   p++;
               }
   }
   //--------------------------------------------------
   //delay
   //--------------------------------------------------

   void delay_ms(unsigned char n)
   {
             int i,j;
             for(i=1000;i>0;i--);
             {
             for(j=25*n;j>0;j--);
             }
   }
   //--------------------------------------------------
   //sysinit
   //--------------------------------------------------
   void sysinit(void)
   {
              PCON I=0x80;
              SCON=0x50;
              TMOD=0x21;
              TH1=255;
              TL1=255;
              TR1=1;
              ES=0;
              TH0=0xB8;
              TL0=0x00;
              TR0=1;
              ET0=1;
   }
   //--------------------------------------------------
   //WenbenChange
   //--------------------------------------------------

   void WenbenChange1(void)
   {
   uchar wenben1[30]={0xAA 0x53 0x00 0x00 0x00 0x00 0xCE                       0xE4 0xBA 0xBA 0xB9 0xC8 0xF6 0xCE
                      0xBF 0xC6 0xBC 0xBC 0xD3 0xD0 0xCF
                      0xDE 0xB9 0xAB 0xCB 0xBE 0xCC 0x33 0xC3 //顯示的漢字為“武漢谷鑫科技有限公司”
               send_str(wenben1,30);
               delay_ms(100);
    }
    //---------------------------------------------
    //main()Routine
    //---------------------------------------------

    int main(void)
    {
               EA=0;//關中斷
               Sysinit();
               EA=1;//開中斷
              
        delay_ms(40);
        
        while(1)
        {
               delay_ms(100);
               wenbenchange1();
        }
               return 0;
    }
    //---------------------------------------------
    //End Of File
    //---------------------------------------------                      

稍后放照片上面 看看效果  

有需要可以和我發郵件啊

3Q

      

www.mcutech.cn

祝大家新年快樂

武漢谷鑫科技

感謝大伙的支持啊